Note: All figures are supplied unpainted and in kit form. Painted figures
are for illustration only.
Here you can download copies
of instruction sheets and some other stuff
scale Motorsport Range
different versions of the 1960s Bell helmet are available in Packs as shown:
RD60: No peak, uncovered face - £3.60
RD61: With peak, uncovered face - £3.60
RD62: With peak, scarf over face - £3.60
RD63: Lipped peak, uncovered face - £3.60
RD64: Lipped peak, scarf over face - £3.60
Each pack contains 5 heads:
2 with no goggles, 2 wearing goggles
and 1 with goggles raised.
2 x 73mm lengths plus posts
the short curved back end pieces at the end of a run of barrier [3 left hand
and 3 right], plus uprights.
Bell helmets, cotton overalls . . .
Most of these figures come with
separate heads. They can be combined with our helmet packs below to make them
represent virtually any driver at any race in this period. You can see the
The exceptions are RD22, RD23,
RD26, RD31 and RD32 which are all cast in one piece. They need a hacksaw to
get the head off!
the standard Armco barrier found at all race circuits.
For assembly as single, double or triple Armco by adapting the posts provided.
Pack contains two 73mm lengths & posts.
RD51 - £2.30
Fire Extinguishers 
RD114 - £2.30
Quick Lift Jack
has 6 empty helmets without goggles.
RD72 has 6 empty
helmets with goggles raised.
Each set contains:
2 helmets without peak
2 helmets with peak
2 helmets with lipped peak